SG10G2 D2/D4 | 10″ 2,000W Max Power Car Subwoofer
Available with 10”, 12” and 15”
SG-G2 sub’s built with double high flux ferrite motor. The motor utilizes Y30, features an enormous 15mm (0.6”) magnetic gap to ensure the coil is always under control.
This motor drives a 2.5” diameter 4-Layer Cooper Wire Aluminum Coil with an extremely long winding (0.65” long) wound on a thick aluminum former to incredible levels of excursion.
This model use fiber glass cone increases the intensity of the cone and reduces nonlinear distortion. The SG-G2 series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.
SG10G3 D2/D4 | 10″ 2000W Max Power Car Subwoofer with Dual Voice Coils
The Audio Yong SG10G3 D2/D4 10″ Car Subwoofer is designed for exceptional bass performance and reliability, delivering a powerful 2000W peak power and 1000W RMS power handling. Built for car audio enthusiasts, this subwoofer ensures precise, distortion-free bass for an enhanced audio experience.
Equipped with a 76.5mm (3″) CCAW voice coil, a high flux ferrite magnet, and a durable aluminum bobbin, the SG10G3 is engineered to handle high power levels with efficiency and durability. The dual 4Ω voice coils provide flexible wiring options for various amplifier setups, ensuring compatibility with your car audio system.
The frequency response of 48-300Hz and 23.5mm maximum linear excursion enable deep, impactful bass with dynamic accuracy. Its paper cone construction ensures natural sound reproduction, while the stamped steel basket adds strength and reliability. Advanced T-S parameters, such as a resonant frequency (Fs) of 48Hz and a Qts of 0.69, make the SG10G3 suitable for sealed or ported enclosures.
SE10V5 D2/D4 | 10″ 2,000W Max Power Car Subwoofer
Available with 10”,12” and 15”.
The SE-V5 Series subwoofer design FEM optimized open motor, provide low distortion and highly motor efficiency. Built in double Nomex &PC mixture dampers. Kraft pulp fiber non-pressed cone, 2.5inch diameter 4 layer coil, Double stacked Ferrite, Stamped steel basket, copper coil, black aluminum former material, Kraft pulp fiber non-pressed cone,foam surround material. The SE-V series has continued to be one of the most popular subwoofer lines we have ever released.
SG10G5 10-Inch 2000W Max Power Car Subwoofer
Available with 6.5″ 8″ 10″ 12″ 15″
The Audio Yong SG10G5 10-Inch 2000W Max Power Car Subwoofer is a high-powered solution for car audio enthusiasts seeking superior bass performance. Built with premium materials and advanced engineering, this subwoofer delivers exceptional sound clarity and deep, powerful bass.
Key Highlights:
- Incredible Power: Supports up to 2000W max power and 1000W RMS, perfect for bass-heavy music enthusiasts.
- High Sensitivity: Features a sensitivity rating of 82.2dB, ensuring loud, impactful sound.
- Frequency Response: Operates within 48-300Hz, producing deep, rich bass tones.
- Impedance Flexibility: Designed with dual 4-ohm impedance and 4-ohm DC resistance, allowing for versatile system setups.
- Sturdy Build: Weighing 12.63kg, this subwoofer combines durability and power for long-lasting performance.
Premium Build Quality:
- Voice Coil: Features a 76.5mm aluminum bobbin with CCAW wire for better heat dissipation and enhanced durability.
- Magnet System: Equipped with a high flux ferrite magnet and a 12mm magnetic gap height, providing consistent and reliable output.
- Max Linear Excursion: Achieves 23.5mm of excursion, ensuring distortion-free, precise low-frequency reproduction.
Advanced Engineering:
- T-S Parameters: Optimized for performance with a Qts of 0.69, BL product of 12.52, and VAS of 7.29L, delivering impactful and responsive bass.
- Moving Mass (Mms): A 203.7g moving mass for smooth and controlled sound output.
- Effective Piston Area (SD): 314.1cm², allowing efficient air movement for greater bass clarity.
- Resonant Frequency (Fs): Tuned at 48Hz, ensuring deep and powerful bass output.
SG10 D2/D4 | 10″ 2,000W Max Power Car Subwoofer
Available with 10”, 12” and 15”
SG10, SG12 and SG15, built with high flux ferrite motor. The motor utilizes Y30. The SG Series features an enormous 12mm (0.5”) magnetic gap to ensure the coil is always under control.
Keeping the subwoofer operating cool under such extreme conditions, is the result of the advanced air flow cooling design incorporated into the motor structure.
This motor drives a 3” diameter 4-Layer Flat Wire Aluminum Coil with an extremely long winding (0.95” long) wound on a thick aluminum former to incredible levels of excursion.
SE12G3 D2/D4 | 10″ 2400W Max Power Car Subwoofer with Dual Voice Coils
Available with 10″ 12″ and 15″
The SE Series subwoofer both in terms of power output and acoustic responsiveness across the entire low end frequency range. The engineering considerations that went into developing this 12inch subwoofer are extensive, and contribute to why the SE series has continued to be one of the most popular subwoofer lines we have ever released.
SE-G3 uses a powerful ferrite motor and a 3” high temperature copper voice coil. This speaker is able to withstand loads up to 1200 watts. The model is presented in three sizes, 10, 12 and 15 inches, the choice of voice coil impedance 2+2 or 4+4 ohm.
SG12G1 D1/D2 | 12″ 3,000W Max Power Car Subwoofer
SG sub’s built with tripe high flux ferrite motor. The motor utilizes Y30. The SG Series features an enormous 15mm (0.6”) magnetic gap to ensure the coil is always under control. This motor drives a 3” diameter 4-Layer Flat Wire Aluminum Coil with an extremely long winding wound on a thick aluminum former to incredible levels of excursion.
We use 100% American made voice coils. We could take advantage of an extremely long 4-layer coil (the 4-layer coil keeps the mass and inductance down) for incredible linear x-max while the powerful motor allows us to achieve the level of BL we desired. The movement with multilayer 10” spiders and foam surround, make the sound cleaner and stronger.
The SG series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.
SG12G6 D1/D2 | 12″ 3,000W Max Power Car Subwoofer
SG12G D1/D2 | 12″ 3,000W Max Power Car Subwoofer
S3012NEO D2/D4 | 12″ 3,000W Max Power Car Subwoofer
Available with 12″ and 15″
The S3012/3015NEO series utilizes a high flat 3” aluminum voice coil, which combined with its massive 300 Oz NEO motor, allows this subwoofer to deliver head turning bass at the highest SPL levels.
Furthermore, we integrated a stitched, high roll slim foam surround, with a competition grade paper cone, increase the effective area. Ensuring that this subwoofer is setting a new precedent in terms of sound quality and strength.
Whether you are looking to be the loudest vehicle at a car show, or just wanting to enjoy the bass in your daily driver at unprecedented sound levels, these series sub is the perfect choice.
SP12G2 D1/D2 | 12″ 4,000W Max Power NEO Car Subwoofer
Available with 12″, 15″ and 18″
SP-G2 sub’s built with extremely high efficiency NEO motor, we use progressive 10″ dual spider’s optional Heli-cool system to improve the cooling performance.
Design with Die-Cast basket, compound curvilinear cone and push terminals. FEA optimized motor design carbon cap standard stitched lead wire. The movement with multilayer spiders and foam surround make the sound cleaner and stronger. The standard 3″ aluminum 8 layer flat-wind aluminum High X-max coils made in USA push the excursion capabilities to ±28mm.
SP12G3 D1/D2 | 12″ 4,000W Max Power NEO Car Subwoofer
SP-G3 sub’s built with extremely high efficiency NEO motor, Die-Cast basket and compound curvilinear cone.
The movement with multilayer spiders, foam surround and high temperature 4 layers coil made in USA, make the sound cleaner and stronger. The standard 3” aluminum 4 layer flat-wind aluminum, high X-max coils push the excursion capabilities to±28mm.
