SG10 D2/D4 | 10″ 2,000W Max Power Car Subwoofer
Available with 10”, 12” and 15”
SG10, SG12 and SG15, built with high flux ferrite motor. The motor utilizes Y30. The SG Series features an enormous 12mm (0.5”) magnetic gap to ensure the coil is always under control.
Keeping the subwoofer operating cool under such extreme conditions, is the result of the advanced air flow cooling design incorporated into the motor structure.
This motor drives a 3” diameter 4-Layer Flat Wire Aluminum Coil with an extremely long winding (0.95” long) wound on a thick aluminum former to incredible levels of excursion.
SE12G3 D2/D4 | 10″ 2400W Max Power Car Subwoofer with Dual Voice Coils
Available with 10″ 12″ and 15″
The SE Series subwoofer both in terms of power output and acoustic responsiveness across the entire low end frequency range. The engineering considerations that went into developing this 12inch subwoofer are extensive, and contribute to why the SE series has continued to be one of the most popular subwoofer lines we have ever released.
SE-G3 uses a powerful ferrite motor and a 3” high temperature copper voice coil. This speaker is able to withstand loads up to 1200 watts. The model is presented in three sizes, 10, 12 and 15 inches, the choice of voice coil impedance 2+2 or 4+4 ohm.
SG12G1 D1/D2 | 12″ 3,000W Max Power Car Subwoofer
SG sub’s built with tripe high flux ferrite motor. The motor utilizes Y30. The SG Series features an enormous 15mm (0.6”) magnetic gap to ensure the coil is always under control. This motor drives a 3” diameter 4-Layer Flat Wire Aluminum Coil with an extremely long winding wound on a thick aluminum former to incredible levels of excursion.
We use 100% American made voice coils. We could take advantage of an extremely long 4-layer coil (the 4-layer coil keeps the mass and inductance down) for incredible linear x-max while the powerful motor allows us to achieve the level of BL we desired. The movement with multilayer 10” spiders and foam surround, make the sound cleaner and stronger.
The SG series is really a different kind of woofer due to its incredibly linear suspension. They are designed for the LOWEST level of bass extension possible in a small enclosure while maintaining extremely low levels of distortion.
SG12G6 D1/D2 | 12″ 3,000W Max Power Car Subwoofer
SG12G D1/D2 | 12″ 3,000W Max Power Car Subwoofer
S3012NEO D2/D4 | 12″ 3,000W Max Power Car Subwoofer
Available with 12″ and 15″
The S3012/3015NEO series utilizes a high flat 3” aluminum voice coil, which combined with its massive 300 Oz NEO motor, allows this subwoofer to deliver head turning bass at the highest SPL levels.
Furthermore, we integrated a stitched, high roll slim foam surround, with a competition grade paper cone, increase the effective area. Ensuring that this subwoofer is setting a new precedent in terms of sound quality and strength.
Whether you are looking to be the loudest vehicle at a car show, or just wanting to enjoy the bass in your daily driver at unprecedented sound levels, these series sub is the perfect choice.
SP12G2 D1/D2 | 12″ 4,000W Max Power NEO Car Subwoofer
Available with 12″, 15″ and 18″
SP-G2 sub’s built with extremely high efficiency NEO motor, we use progressive 10″ dual spider’s optional Heli-cool system to improve the cooling performance.
Design with Die-Cast basket, compound curvilinear cone and push terminals. FEA optimized motor design carbon cap standard stitched lead wire. The movement with multilayer spiders and foam surround make the sound cleaner and stronger. The standard 3″ aluminum 8 layer flat-wind aluminum High X-max coils made in USA push the excursion capabilities to ±28mm.
SP12G3 D1/D2 | 12″ 4,000W Max Power NEO Car Subwoofer
SP-G3 sub’s built with extremely high efficiency NEO motor, Die-Cast basket and compound curvilinear cone.
The movement with multilayer spiders, foam surround and high temperature 4 layers coil made in USA, make the sound cleaner and stronger. The standard 3” aluminum 4 layer flat-wind aluminum, high X-max coils push the excursion capabilities to±28mm.
SP12N D1/D2 | 12″ 4,000W Max Power NEO Car Subwoofer
Available with 12″, 15″ and 18″
The SP-N series utilizes a super power AL coil made in USA, NEO motor with FEMM design. Allows this subwoofer to deliver head turning bass at the highest SPL levels.
Furthermore, linear suspension with low distortion, strengthen cap super power. Ensuring that this subwoofer have the good sound quality and strength.
SP12G5 D1/D2 | 12″ 6,000W Max Power Car Subwoofer
Available with 12″and 15″
SP12GN D1/D2 | 12″ 6,000W Max Power Car Subwoofer
Available with 12″and 15″
SP15 D1/D2 | 15″ 7,000W Max Power Car Subwoofer
Available with 15″ and 18″
